ScalaMirage™ range is made up of decorative acid etched glass, available in a range of different patterns. The broad range of patterns for interiors is in continuous evolution and custom designs can be also created for specific projects.

  • icon descriptionDecorative
icon description
Create Beautiful SpacesIntruderLam™ is specifically developed to offer a resilient and long-lasting barrier that resists penetration even upon breakage.
Enjoy the Combination of Privacy & LightThe translucency of ScalaMirage™ offers high light transmission to provide natural illumination whilst maintaining privacy.
Safety & Security when toughenedScalaMirage™ is suitable for safety glass applications when toughened, reducing the risk of thermal breakage and keeping you safe and secure.
Product Range

*The maximum sheet size is a manufacturing size and may be in excess of the safe glazing sizes set out in Australian standards. **Image is for visual indication only.



  • Windows for privacy and decoration
  • Shower and bath enclosures


  • Doors
  • Partitions
  • Shower Screens
  • Frameless Glazing


Technical Information

To retain translucency in shower screen applications it is advisable to install ScalaMirage with etched surface facing away from water source.

Range Specific
All ScalaMirage stock sheets have a border all around the edge. Circle Fade is a positional product, additional information is required to allow the product to be processed correctly.

How to Specify
Glass Thicknesses and colours available:
  • Clear  4mm Linen & Circle Fade

Select from: Annealed, Heat Strengthened, Toughened or Toughened Heat Soaked

* If unsure, select in compliance with AS1288–2006 or manufacturers recommendation.*

Annealed glass is glass produced without internal stresses imparted by heat treatment, i.e., rapid cooling, or by toughening or heat strengthening. Annealed glass is not a Grade A safety glass.

Glass converted to a safety glass by subjection to a process of pre-stressing so that, if fractured, the entire piece disintegrates into small, harmless particles. Toughened glass is a Grade A Safety Glass

Heat Soaking
Heat soak testing is a destructive test, which reduces the likelihood of spontaneous breakage by converting impurities such as nickel sulphide inclusions. Heat soaking is required in some but not all applications. If unsure, select in compliance with AS1288-2006 or manufacturers recommendation.

Heat Strengthening
All glass which requires extra strength and thermal resistance will be heat strengthened. Heat strengthening increases the strength of annealed glass; however, it is not a substitute for toughened glass. In the event of fracturing heat strengthened glass will crack and tends to remain in glazed position.

All glass is to be selected and installed in accordance but not exclusively with the following Australian and/or New Zealand Standards

  • AS 1288 Glass in Buildings Selection and Installation
  • AS 1170 Minimum Wind Loads on Structures
  • AS/NZ 2208 Safety Glazing Materials in Buildings
  • AS/NZ 4666 Insulating Glass Units
  • AS/NZ 4667 Quality Requirements for cut-to-size and Processed Glass


Oceania Glass makes and distributes glass. Oceania Glass does not process glass nor produce Insulated Glass Units. Processing of glass and production of Insulated Glass Units is undertaken by independent processors. Speak with your nominated glass processors to understand their processing capability.